Amegac ISO Peñoles Galvanized 
Facebook Twitter Teléfono
Metalization by
Thermal Spray
Plasticized by
Thermal Spray
Hot Dip
Galvanization
Cold Process
Galvanization
Cleaning
of Pieces
Other
Services
HOT DIP GALVANIZATION

In our plant we cover iron or steel with zinc and zinc-iron alloys by immersing the piece in molten zinc thus forming a protective layer of a very long duration in almost all natural environments. A layer which is harder than steel itself, which is capable of protecting small bare/exposed areas (Galvanic Protection), and is extremely economical. For small parts, we apply centrifugal force after immersion.  We galvanize only the exterior of power radiators and other such parts. 

GALVANIZINC & DUPLEX SYSTEMS

On galvanized coatings, we perform a surface preparation and we then add a layer of primer which is zinc compatible (Galvanizinc System) in order to facilitate the application and adhesion of finishing paints (Duplex System), carried out in our plant or by the client. 

SPECIFIC PRODUCT SERVICES

galvanizacion_caliente galvanizacion_caliente galvanizacion_caliente galvanizacion_caliente
COLD PROCESS GALVANIZATION

In our plant or in the field we apply these re-coating paint type processes with 95% and 93% zinc in dry film which are capable of matching or exceeding the protection offered by hot dip galvanizing and which are much more heat resistant than this.  ZRC is a zinc organic and ZEROVOC is super organic.  These can be applied without the need for Sand-Blast. 

SPECIFIC PRODUCT SERVICES

galvanizacion_frio
PLASTICIZED BY THERMAL SPRAY

In our plant or in the field we cover metals, metal layers, wood, concrete, cement, brick or stone by spraying micro-drops of molten plastic thus forming impermeable layers which are highly resistant to attack by moisture, salinity, acids or other aggressive chemicals. Plastics are also resistant to UV and impacts, they are ductile, elastic, accepted for contact with food, and of very low toxicity in case of fire. We have different plastics with a variety of colors. The application of plastic on our metal coatings can achieve a duration of more than 100 years. 

SPECIFIC PRODUCT SERVICES

plastificado plastificado plastificado plastificado
METALIZATION BY THERMAL SPRAY

In the plant or in the field, we recoat steel pieces and other metals by supersonic projection of molten micro-drops of: zinc, aluminum and zinc-aluminum alloys, either by gas or electric gun. Pieces  can be of unlimited size and the protective layers obtained are of very long duration. Duration can be programmed according to thickness of the coating. 

METALYZINC SYSTEM

At our plant or in the field, we metalize by thermal spray with an alloy of 85% Zinc and 15% Aluminum and we apply a special sealant-passivator. This system bears our name and can  guarantee decades of duration even in the most aggressive environments found in the Gulf of Mexico. Field and laboratory studies, plus our own experience, endorse this. You can also choose to apply finishes that provide color and/or longer duration. 

SPECIFIC PRODUCT SERVICES

metalizado metalizado metalizado metalizado
CLEANING OF PIECES

CLEANING OF PIECES 

Before coating, all contaminants that can hinder or inhibit protection are removed from the surface, and in some cases an anchor pattern or etch profile is generated thus offering the best grip for the coating. For this we have the following line of abrasives applicable both wet or dry : Grit-Blasting, Sand Silica (Sand-Blasting), Garnet (Blasting) and Bicarbonate (Soda-Blasting).

limpieza_de_piezas limpieza_de_piezas limpieza_de_piezas
OTHER SERVICES
GALVANIZINC SYSTEM
We perform a surface preparation on a galvanized coating and then we add a layer of primer which is zinc compatible (Galvanizinc System) in order to facilitate the application and adhesion of finishing paints (Duplex System), either in our plant or done by the client.
METALYZINC SYSTEM
We apply a layer of Zinc alloy (85%) and Aluminum (15%), over iron, steel or other metals, and on top of this, a special sealant-passivator which, in addition to covering surface pores, provides greater chemical stability. This results in a greater protective capacity for the alloy along with the contribution of the sealant. This protective system can guarantee nulled corrosion of the substrate for several decades even in the most corrosive environments of the Gulf of Mexico. Its benefits have been proven through various laboratory and field tests, as well as by our own applications for close to three decades. That's why this system bears our name: METALYZINC. It can be applied either in plant or on site.
LONG TERM PROTECTION FOR FITTINGS AND OTHER SMALL PIECES
For fasteners (bolts, anchors bolts, nuts, washers, screws, studs etc…) most systems can be applied which will ensure duration similar to those of the protected elements they hold: CENTRIFUGAL HOT GALVANIZED, SHERARDIZED/GALVANIZED DRY, and our advanced protection system the multi-metallic MEGAZINC. All three will last several times longer than the electrolytic zinc commonly applied to these parts. All are applied in the plant.
CHEMICAL CLEANING
We eliminate surface dirt, grease/oils and oxidants and protect with chemical products.
INDUSTRIAL PAINT SYSTEMS
In our plant or in the field, advanced specification industrial paints are applied by our highly qualified and NACE certified personnel.
APPLICATION OF INHIBITORS
In our plant or in the field, we apply corrosion inhibitors from VpCI from the world leader CORTEC Corporation for seasonal protection for pieces and equipment which is sensitive, metallic, electric and/or electronic, during the production process, transfer or operation.
OTHER COATINGS
We also have experience in the application of phosphatized coatings both cold or hot, and teflon.
SPECIFIC PRODUCT SERVICES
We use specific systems to protect the following products:
REGISTERS of all types through hot dip galvanization. We can also manufacture these.
SERPENTINES of all types through total hot dip galvanization or only exteriors.
TRANSFORMER RADIATORS through exterior only galvanizing or without painted finish.
ELECTRIC TRANSFORMERS through metalization or painting. 
GAS TANKS through metalization or painting.
HYPERBARIC CHAMBERS through metalization and/or painting.
AIR CONDITIONING EQUIPMENT through cold galvanization, inhibitors and special paints.
WATER HEATERS/BOILERS through cold galvanization and special paints.
ACID PROCESS BATHS through structural plasticization and cutting, assembly, and welding of polyethylene or polypropylene plates. Manufacturing can be included.
SUBTERRANEAN PIPELINES through plasticization by thermal spray.
TANKS, STRUCTURAL DEPOTS, OF METAL OR CONCRETE, SUBJECT TO ACID ATTACK through plasticization by thermal spray.
ANTI-ACID FLOORINGS through plasticization by thermal spray.
SWIMMING POOLS WITH CEMENT WALLS AND FLOORS through plasticization by thermal spray.
WE PROTECT

• Metallic structures for industrial spaces, doors, cranes, billboards, etc.

• Lamp posts, traffic lights, street/highway signs and urban metallic furnishings.

• Transformers, structural parts/ironworks for transmission towers and other electrical installations.

• Tanker trucks for gases and liquids, trailers,trailer beds, containers, and racks.

• Tanks and equipment for bottling plants, packers and food processors.

• Washers, feeders, weigh scales and all types of agricultural and livestock installation.

• Tubing, accessories and metallic parts for ships of all types, boats, and speedboats.

• Protection barriers, fences, handrails, stairs, playgrounds and all types of ironwork.

• Smooth and anti-slip plates, Irving grids, platforms, registers and sewer drains.

• Pre-made frameworks, corrugated reinforcing bars, wire and wire mesh, etc.

• Commercial ironwork and structures: angles, sills, rounds, squares, channels and joists.

• Steel tubing/ductwork with seam or seamless, laminated and tubular profiles (PTR), JOIST type joists, etc.

• And almost any piece of iron, steel and other non-ferrous metals, from as small as a screw to as big as a ship.

GALLERY
Galeria Galeria Galeria Galeria Galeria Galeria Galeria Galeria Galeria
LOCATION MAP
Framboyanes Lote 3, Ciudad Industrial Bruno Pagliai,
Bruno Pagliai, 91697 Veracruz, Ver.
Tel: +52 229 981 1518 --- 229 981 1519
                  229 981 1520 --- 229 981 1521 --- 229 981 1522
Contact us
LINKS
AMEGAC SGS PEÑOLES zinacor CORTEC Galvanized rebar Z.R.C. Grupo COBOS
HOME| WHO WE ARE| SERVICES| ANTICORROSION BENEFITS| APPLICATIONS| GALLERY| CONTACT US| EMPLOYMENT